ASDA-A3
Export the curve data of the first section: right-click on the table, select Export points and
3.
a window appears. Select the check box for All points and specify the save location, then
click OK to save.
Plan and create the second section of the E-Cam curve: the reset zone has 100 position
4.
points in total. You must set the E-Cam segment number N (P5.082) to 100. Since the
curves created by this function are all in forward direction, you must first create a curve,
and then reverse it to complete the curve for the reset zone.
Motion Control
7
7-135