Chapter 3 Before Using; Switching The Power On/Off; Switching The Power On; Switching The Power Off - Oce CS9360 User Manual

CS9360 User's Guide
Chapter 3
3.1

Switching the power ON/OFF

3.1.1

switching the power ON

Step 1:
Press [Power] to switch ON the printer.
The Power lamp lights up in blue.

The printer starts initial operation.

When the initial operation is complete, the printer enters Normal.

NOTE
If there is a problem during the initial operation, a message is displayed and the printer

may stop operating.
3.1.2

Switching the power OFF

Step 1:
Verify the following regarding the operational condition of the product.
Printing or other operations are not in progress.

The operation panel display is Normal.

The Low lamp lights up in green.

NOTE
If the High lamp lights up in green, the head height is set to High.

Return the head height to Low before switching the power OFF.
4.2.5.2 When returning the print head to the original position
Step 2:
Press [Power] to switch OFF the printer.
• The Power lamp is switched off.
Before using
3-25