Replacing Cutter - Oce CS9360 User Manual

Step 12: Use tweezers to remove the flushing-box sponge from the flushing-box.
1
N°.
1
2
CAUTION
Do not drop waste fluid when replacing the flushing-box sponges.

If waste fluid comes into contact with the grid roller, the surface of the grid roller will be
damaged, and the media feed function may be affected.
Step 13: Install the new flushing-box sponge to each flushing box.
Step 14:
Close the front cover.
6.1.4

Replacing Cutter

(1) Replacement time
Replace the cutter when the following situation occurs.
a. When the paper is not cut smoothly
b. When the cut surface is feathered, etc
(3) Replacing steps
Step 1:
If the printer is switched ON, make sure the following.
Printing or other operations are not in progress.

The operation panel display is Normal.

Step 2:
Display the CR Maintenance menu.
1
2
Flushing boxes
Flushing-box sponges
6-120
Name
CS9360 User's Guide