Counting System Cdee; Introduction; Technical Data; Basic Structure - KERN CME 100-3 Operating Instruction

12 Counting system CDEE

12.1 Introduction

A counting system allows the construction of a dual balance assembly for piece
counting.
The KERN Scale CDE is used as quantity scale for the determination of the piece
number/piece weight.
The high resolution of Kern scale KERN CME allows a very precise determination of
the reference weight for items of low weight.
The weight of quantity must be determined till to the maximum of the CME on the
reference balance.
If the value is > max of the CME, the CDE can be used.
Information:
User instructions for the counting system are given below. A detailed description of
the weighing scale's operation can be found in the previous chapters.

12.2 Technical data

Counting Quantity scale
system
KERN KERN
CDEE 35K0.001 CDE 35K1
CDEE 35K0.01 CDE 35K1
CDEE 35K0.01L CDE 35K1L
CDEE 60K0.01 CDE 60K2
CDEE 60K0.01L CDE 60K2L
CDEE 150K0.1 CDE 150K5

12.3 Basic structure

The counting system consists of the following components:
• Quantity scale KERN CDE
• Reference scale KERN CME
• Interface cable CDE-A01
34
Reference scale
Weigh- Legibility
ing (d)
range g
(max)
kg KERN
35 1 CME 100-3
35 1 CME 300-2
35 1 CME-300-2
60 2 CME 300-2
60 2 CME 300-2
150 5 CME 3000-1
Weigh- Legibility
(d)
ing range
(max) g
g
100 0,001
300
300
300
300
3000
CDE/CME/CDEE-BA-e-1014
Minimum
piece
weight
g/item
0,002
0,01 0,02
0,01 0,02
0,01 0,02
0,01 0,02
0,1 0,2