Weighing With Multiplication Factor Via The Application Unit <Ffa - KERN EWJ Operating Instructions Manual

• For the required settings of an application unit (FFA, %) selection,
please see chap. 11.4.2 and 11.4.3.
• Using the [MODE] button you can switch between the active unit 1 and
unit 2.
11.4.2 Weighing with multiplication factor via the application unit <FFA>
Here you determine with which factor the weighing result (in gram) will be multiplied.
By that way, e.g. a known error factor in the weight determination can be immediately
taken into account.
TEWJ-B-BA-e-2310
 Select menu setting < unit> and confirm on [  ] but-
ton.
 Use the navigation keys  to select the setting < FFA >
and confirm on [  ] button.
 Enter multiplication factor, numerical input
see chap. 3.2.2, the active digit flashes.
39