Weighing With The Multiplication Factor <Ffa; Percentage Weighing - KERN PCJ Series Operating Instructions Manual

11.4.2 Weighing with the multiplication factor <FFA>
Here, you can specify the factor to be used for multiplying the weighing result (in
grams).
All the same, determining weight you can consider e.g. the known error factor.
11.4.3 Percentage weighing <%>
<Percentage weighing> application enables to check the percentage sample weight
in reference to the reference weight.
im oberen Rand
der Anzeige
im oberen Rand
der Anzeige

TPCJ-BA-e-2310
 Select <unit> menu setting and confirm, confirm by ➔-
button.
 Use the navigation buttons  to choose the setting
<FFA> and confirm by ➔-button.
 Enter the multiplication factor; for introducing the numerical
value see chapter 11.4.2, the active item is blinking.
 Choose the menu item <unit>.
 Place the reference weight corresponding to 100%.
 confirm by ➔-button.
 Use the navigation buttons  to choose the setting <%>
and confirm by ➔-button.
 Confirm the blinking weight value by pressing ➔-button.

From now on, the sample weight is displayed as percent-
age referring to the reference weight.
37