Silicon Graphics TP9400 RAID Owner's Manual page 89

!
!
!
007-4304-003
Caution: Electrostatic discharge can damage sensitive components. Use appropriate
antistatic precautions before handling any components.
1. Remove or open the rear access panel on the rack.
Caution: Bending or damaging Fibre Channel cables can result in degraded
performance or data loss. Fibre Channel cables are fragile and can break easily.
Handle the cables carefully. Do not pinch them with tie wraps, step on them, or bend
them at sharp angles.
2. Unpack the new SFP transceiver and, if available, read the instructions shipped
with the new part. If necessary, modify the remaining steps to meet the system
requirements. Kits often contain the most current servicing information. If the kit
instructions conflict with those in this procedure, use the kit instructions.
Caution: To prevent possible data loss, do not accidentally remove cables from an
SFP transceiver that is not failed.
3. Remove the interface cables from the failed SFP transceiver (Figure 4-14).
Replacing an SFP Transceiver
69