Creating A New Group To Store Measurements - DAKOTA ULTRASONICS MAX II Operation Manual

Dakota Ultrasonics

3.4 Creating a New Group to Store Measurements

Now that the MAX II is all setup, this section will explain how to get started measuring
unloaded initial lengths. In order to do this, we need to create a group that contains
bolts. A group can have up to 250 bolts, each bolt containing 1 reference length (L-
REF), and up to 51 elongations. Keep in mind that the MAX II uses a group to store
measurements and all gauge settings at the time of measurement.
1) Press the MENU key once to activate the menu items tab. Press the MENU
key multiple times to tab right, and the ESC key multiple times to tab left,
until the DATA menu is highlighted and displaying the submenu items.
Alternatively, press the MENU key once, followed by pressing the
LEFT and RIGHT arrow keys multiple times using the left button wheel to
scroll the tabbed menus.
Note: Pressing the
2) Press the
button wheel to scroll through the sub menu items until NEW is highlighted.
3) Press the ENTER key to display the New Group Edit Box.
4) Press the
button wheel to scroll through the new Group List Items until NAME is
highlighted.
5) Press the ENTER key to activate the Alpha Edit Box.
Find Quality Products Online at:
Creating a Group Name
key will automatically open the DATA tabbed menu.
UP and DOWN arrow keys multiple times using the left
UP and DOWN arrow keys multiple times using the left
12
GlobalTestSupply
www. .com
sales@GlobalTestSupply.com