Table of Contents
Advertisement
MAX II Bolt Tension Monitor
Alarms Connection (LEMO 1 – 5 pin)
Refer to Diagram: The RS-232 connector is a 5 pin female Lemo 1 connector. This
is used for connecting each alarm directly to an external source. An accessory 9 pin
female serial to Lemo 1 - 5 pin male cable will be required to use this feature, and is
not included in the standard kit.
Analog Output (LEMO 1 – 5 pin)
Refer to Diagram: One of the pins in the RS-232 connector is dedicated to high
speed analog out (0-10 volts). This can be terminated to a number of connectors,
BNC most common, and connected to a chart recording device to plot a curve as the
fastener is tightened.
Power Connector (LEMO 1 – 2 pin)
Refer to Diagram: The Lemo 1 2 pin connector is used for direct line power and
charging the Li-Ion battery pack.
39
GlobalTestSupply
www.
.com
Find Quality Products Online at:
sales@GlobalTestSupply.com
Advertisement
Table of Contents
