Table of Contents
Advertisement
Dakota Ultrasonics
AUTO SET: Automatically locates the detection point if the measurement is out of the
viewable display area. Used when measuring reference lengths only. Refer to
section 12.9 for further info.
APPROX LEN: In order for the user to use the Auto Set feature, an approximate
length of the fastener must be entered. The approximate length gives the MAX II
some idea of where to turn on the receiver and look for the detection, or end of the
bolt. This sub menu item enables the user to edit the effective length at anytime.
Refer to section 12.9 for further info.
MEASURE MODE: Used to select the measurement mode for different application
requirements. The mode options are P-E (pulse-echo), E-E (echo-echo), or E-EV
(echo-echo-echo). Refer to page 120 for further info.
4.9 SETUP – Menu
OPEN: Displays a list of factory and user defined setups currently stored in memory.
These setups can be recalled and used at any time. Refer to page 177 for further
info.
SAVE: Provides the user with the ability to save a custom setup that has been
modified or created by the user. Refer to page 178 for further info.
DELETE: Provides the user with the ability to delete specific setups previously save
in memory. Refer to page 181 for further info.
DEFAULT SETUP: Loads a basic default setup. Use only as a last resort when the
setups in the MAX II have been corrupted and a computer is not accessible. Refer to
page 183 for further info.
LANGUAGE: Provides the user the ability to select different languages for the MAX
II. Refer to page 184 for further info.
4.10 DATA – Menu
32
GlobalTestSupply
www.
.com
Find Quality Products Online at:
sales@GlobalTestSupply.com
Advertisement
Table of Contents
