Copying Files (Setups, Data, & Screenshots) - DAKOTA ULTRASONICS MAX II Operation Manual

Dakota Ultrasonics
1) Press the MENU key once to activate the menu items tab. Press the MENU
key multiple times to tab right and the ESC key multiple times to tab left until
the XFER menu is highlighted and displaying the submenu items.
Alternatively, press the
using the left button wheel.
2) Use the
wheel to scroll through the sub menu items until STORAGE is highlighted.
3) Use the
wheel to toggle STORAGE internal/external. Note: Capture will be
displayed in a toolbar cell on the active display, indicating the feature is
enabled.
16.6 Copying Files (Setups, Data, & Screenshots)
The MAX II can store a number of setup, data and screenshot files to either the
internal or external SD memory cards. All the copy routines will copy files from the
currently selected storage device to the other. Therefore, if the current storage
device is set to 'internal', the copy routines will transfer files directly to the external
device. Note: If the MAX II is powered up without an external SD card inserted in
the slot, the copy routines in the XFER menu will be inactive. The steps below
outline the procedure for copying files from one storage device to the other as
follows:
Find Quality Products Online at:
Selecting Storage Device
LEFT and RIGHT arrow keys multiple times
UP and DOWN arrow keys multiple times using the left button
LEFT and RIGHT arrow keys multiple times on the right button
GlobalTestSupply
www.
188
.com
sales@GlobalTestSupply.com