Table of Contents
Advertisement
1) Press the
button wheel to scroll through the new Group List Items until NUM BOLTS
is highlighted.
2) Press the ENTER key to display the Digits Edit Box.
3) Press the
button wheel to scroll the highlighted value.
4) Press the
button wheel to scroll the digit locations.
5) Repeat steps 3 & 4 until the NUM BOLTS value is correctly displayed.
6) Press the OK key to save the NUM BOLTS and return to the Group List
Items menu, or ESC to cancel entering the NUM BOLTS.
Note: If a number greater than 250 is entered, an error message box "VALUE
IS OUT OF RANGE" will be displayed.
7) Press the OK key to display the Digits Edit Box and re-enter the NUM
BOLTS.
8) Press the OK key to save the NUM BOLTS and return to the Group List
Items menu, or ESC to cancel entering the NUM BOLTS.
Note: A bolt can have up to 51 possible measurements and 1 initial length (L-
REF). There must be at least one reading per bolt.
Find Quality Products Online at:
UP and DOWN arrow keys multiple times using the left
UP and DOWN arrow keys multiple times using the left
LEFT and RIGHT arrow keys multiple times using the left
Selecting the Number of Readings Per Bolt
GlobalTestSupply
www.
MAX II Bolt Tension Monitor
15
.com
sales@GlobalTestSupply.com
Advertisement
Table of Contents
