Table of Contents
Advertisement
Dakota Ultrasonics
3) Use the
wheel to scroll through the DAMPING values until the correct value is
displayed to the right of the DAMPING menu item.
4) Finally, press the MEAS key to return to the measurement screen and begin
taking readings.
13.10 Digitizer
The digitizer feature provides additional stability when to the measurement by
increasing the number of samples. This can be beneficial when measuring shorter
length fasteners with units set to in/mm hr (high resolution), in order to increase the
resolution. The reverse scenario also then applies to longer length fasteners, not
requiring the increased sample size/shots. The digitizer has three setting options of
1, 2, 4x, with 4x providing the highest number of samples/shots. It should be noted
that increasing the digitizer sample slows down the update speed. For shorter bolts,
this won't be as noticeable as using a 4x digitizer setting for longer bolts. The
procedure to change the digitizer setting is outlined below:
For quick access and editing, refer to navigating the Hot Menus page 36.
1) Press the MENU key once to activate the menu items tab. Press the MENU
key multiple times to tab right and the ESC key multiple times to tab left until
the TUNE menu is highlighted and displaying the submenu items.
Find Quality Products Online at:
LEFT and RIGHT arrow keys multiple times on the right button
Setting the Digitizer
GlobalTestSupply
www.
146
.com
sales@GlobalTestSupply.com
Advertisement
Table of Contents
