Table of Contents
Advertisement
7) Press the OK key to set the Approx. Len. and return to the menu screen, or
ESC to cancel entering the Approx. Len.
Note: If the Approximate length has been entered into the MAX II, the Auto
Set feature can be run simply by pressing the AUTO SET key on the left side of
the keypad.
1) Press the MENU key once to activate the menu items tab. Press the MENU
key multiple times to tab right, and the ESC key multiple times to tab left,
until the UTIL menu is highlighted and displaying the submenu items.
Alternatively, press the
using the left button wheel.
2) Press the
button wheel to scroll through the sub menu items until AUTO SET is
highlighted.
3) Apply a drop of couplant to the bolt or transducer, and attach it to one end of
the bolt. Rotate the transducer clockwise and counter clockwise applying a
small amount of pressure to eliminate any excess couplant between the
Find Quality Products Online at:
Using Auto Set
LEFT and RIGHT arrow keys multiple times
UP and DOWN arrow keys multiple times using the left
133
GlobalTestSupply
www.
MAX II Bolt Tension Monitor
.com
sales@GlobalTestSupply.com
Advertisement
Table of Contents
