DAKOTA ULTRASONICS MAX II Operation Manual page 82

2) Press the
button wheel to scroll through the sub menu items until QUANTITY is
highlighted.
3) Press the
button wheel to scroll the quantity until ELONG is displayed.
4) Press the MENU key multiple times to tab right, and the ESC key multiple
times to tab left, until the MATL menu is highlighted and displaying the
submenu items. Alternatively, press the
multiple times using the left button wheel.
5) Press the
button wheel to scroll through the sub menu items until TYPE is highlighted.
6) Press the ENTER key to display the list of bolt material types.
7) Press the
button wheel to scroll through the material list until the appropriate material
type is highlighted.
Note: If the material type is not in the list of types, select a similar type. This
step is only to get the velocity value in a close proximity – not critical. Write
down the velocity of the material type selected. This will be considered
the Current Velocity.
8) Press the ENTER key to display the confirmation screen.
Find Quality Products Online at:
UP and DOWN arrow keys multiple times using the left
LEFT and RIGHT arrow keys multiple times using the right
UP and DOWN arrow keys multiple times using the left
UP and DOWN arrow keys multiple times using the left
77
GlobalTestSupply
www.
MAX II Bolt Tension Monitor
LEFT and RIGHT arrow keys
.com
sales@GlobalTestSupply.com