Creating A New Group To Store Measurements - DAKOTA ULTRASONICS MiniMax v2.0 Operation Manual

elongation mode, the measurement consists of a difference equation only
(Loaded Length – Unloaded Length =  Length). Therefore, it doesn't matter if
the ultrasonic length is different from the actual physical length, because the 
Length will be the same. Example: 2.0080" physical loaded length – 2.0000"
physical unloaded length = 0.0080"  Length which is equivalent to 2.1080"
ultrasonic loaded length – 2.1000" ultrasonic unloaded length = 0.0080" 
Length.
1) Press the
menu items until TYPE is highlighted.
2) Press the
3) Press the
material list until the appropriate type is highlighted.
4) Press the
5) Press the
to cancel selecting the material type.

3.4 Creating a New Group to Store Measurements

Now that the MiniMax is all setup, this section will explain how to get started
measuring unloaded initial lengths. In order to do this, we need to create a group
that contains bolts. A group can have up to 250 bolts, each bolt containing 1
reference length (L-REF), and up to 51 elongations. Keep in mind that the MiniMax
uses a group to store measurements and all gauge settings at the time of
measurement.
and arrow keys multiple times to scroll through the sub
key to display the list material types.
and arrow keys multiple times to scroll through the
key to display the confirmation screen.
key to select the type and return to the menu screen, or
Creating a Group Name
MiniMax Bolt Tension Monitor
11