Table of Contents
Advertisement
Dakota Ultrasonics
1) Press the
button wheel to scroll through the new Group List Items until CREAT GRID
is highlighted.
2) Press the ENTER key to display CREATE GRID confirmation screen.
3) Press the OK key to save the group and return to the measurement screen.
14.6 Storing a reading
Now that a group has been created, it's time to make some measurements and store
the measurements. The following procedures outline this process:
Note: Once the group has been created it will automatically be displayed as a
grid following the create confirmation screen. It is located at the bottom of the
measurement screen and can be left open for the duration of the inspection
process. This section assumes the group was just created. Refer to the
section on "opening a group" if the file was created at another time.
Key Feature: When the MAX II is displaying a "group", pressing the OK key
will initiate an advance to row number option screen. Use the
UP, and DOWN arrow keys on the left or right button wheel to enter the row
number. Once the row number is correctly displayed, press the OK key to
advance directly to that row number in the grid log.
Key Feature: When the
key multiple times, will toggle through the display options: DIGITS, RF, and
RECT views.
Find Quality Products Online at:
UP and DOWN arrow keys multiple times using the left
Storing a Reading
is displaying a "grid log", pressing the ESC
MAX II
166
GlobalTestSupply
www.
Left, Right,
.com
sales@GlobalTestSupply.com
Advertisement
Table of Contents
