Table of Contents
Advertisement
Dakota Ultrasonics
Note: The Quick Start setup, selected in the previous section, automatically
defaults to English units – inches. Follow the procedure below to change the
units to Metric, if needed.
1) Press the MENU key multiple times to tab right and the ESC key multiple
times to tab left until the MATL menu is highlighted and displaying the
submenu items. Alternatively, press the MENU key once, followed by
pressing the
button wheel to scroll the tabbed menus.
2) Use the UP and DOWN arrow keys to scroll through the sub menu items
until UNITS is highlighted.
3) Press the
button wheel to scroll through the unit options IN (inches), IN HR (inches hi
resolution), MM (millimeters), and MM HR (millimeters hi resolution).
Note: The high-resolution options display an additional digit of resolution to the
measurement. This mode is typically used when measuring very short bolts
with very little elongation.
Find Quality Products Online at:
Selecting the Units
LEFT and RIGHT arrow keys multiple times using the left
LEFT and RIGHT arrow keys multiple times using the right
Selecting the Material Type
10
GlobalTestSupply
www.
.com
sales@GlobalTestSupply.com
Advertisement
Table of Contents
