Table of Contents
Advertisement
MAX II Bolt Tension Monitor
PROJECT: This function provides the user with the ability to create folders (projects)
for a specific customer/Job/Location. Data groups will then be created and stored
into a given project folder. Refer to page 159 for further info.
OPEN: This function provides the user with the ability to recall grids or sequential log
files that currently exist in memory, from a list of grids. Refer to page 173 for further
info.
NEW: Allows the user the ability to create a new alpha numeric grid, or sequential
log file with auto identifiers. It is equipped with custom parameters, rows, and
columns depending on the user's application reporting requirements. Refer to page
163 for further info.
EDIT: Gives the user the ability to change parameters of grid or sequential file
previously saved. Note: Pre-defined coordinates cannot be changed once they have
been created. Refer to page 171 for further info.
CLOSE: Provides the user the ability to close a currently opened grid or sequential
log file. Refer to page 175 for further info.
DELETE ONE FILE: This function provides the user with the ability to delete one
individual grid or sequential log file from a list of multiple grids/files previously saved
in memory. Refer to page 169 for further info.
DELETE ALL DATA: This function provides the user with the ability to delete all files
currently stored in memory. Refer to page 170 for further info.
SUMMARY: Provides the user with an overall summary of the current data group
open/active. Refer to page 170 for further info.
4.11 UTIL (utilities) – Menu
TEMP MODE: This sub menu item enables the user to select the automatic
temperature compensation mode (manual, semi-auto, and auto). This feature is only
available to those units purchased with the automatic temperature compensation
option and probe. Note: Contact Dakota for information on upgrading the MAX II.
Refer to page 71 for further info.
ALARM: Toggles alarm mode on, off, or audible. Refer to page 148 for further info.
ALARM LOW: Gives the user the ability to set the LO limit parameter. If the
measurement falls below this value, a red light will illuminate and sound the internal
beeper. Refer to page 148 for further info.
33
GlobalTestSupply
www.
.com
Find Quality Products Online at:
sales@GlobalTestSupply.com
Advertisement
Table of Contents
