Table of Contents
Advertisement
Dakota Ultrasonics
3.6 Measuring Reference Lengths
At this point, the MAX II is setup and ready to start measuring reference lengths.
We've already setup a bolt group to store the reference length data, and now need to
display the group storage locations prior to making measurements.
1) Press the MEAS key once to activate measure menu items. Press the
MEAS key multiple times to move down and the ESC key multiple times to
move up until the LOG cell is highlighted. Alternatively, press the
and DOWN arrow keys multiple times using the left button wheel.
Note: Pressing the
2) Press the ENTER key to display the Group View Box.
3) Press the
wheel to scroll the target cell cursor to the desired storage location.
Note: The approximate lengths must always be located in the first column A for
all bolts in the group.
4) Place a small amount of couplant on the transducer and attached it to the
bolt. Make sure that the transducer is seated so that there is no couplant
Find Quality Products Online at:
Storing a Reading
key will automatically open the Group View Box.
UP, DOWN, LEFT, & RIGHT arrow keys using the left button
22
GlobalTestSupply
www.
UP
.com
sales@GlobalTestSupply.com
Advertisement
Table of Contents
