Deleting A Saved Setup - DAKOTA ULTRASONICS MAX II Operation Manual

11) Use the
through the setups until the target location to save the Setup is highlighted.
12) Press the OK key to activate the confirmation screen.
13) Press the OK key to save the Setup, or ESC to cancel saving the Setup.
14) Finally, press the MEAS key to return to the measurement screen.
Note: The Name and Comments of the Setup can be edited at any time by
simply repeating the Save Setup routine described above. Therefore, the
Save Setup function can also be considered an Edit Function.

15.4 Deleting a Saved Setup

This option allows a user to delete setup files that were previously saved and no
longer needed. It's a simple feature to allow the user to do a bit of "house cleaning".
Find Quality Products Online at:
UP and DOWN arrow keys on the left button wheel to scroll
Deleting a Setup
181
GlobalTestSupply
www.
MAX II Bolt Tension Monitor
.com
sales@GlobalTestSupply.com