DAKOTA ULTRASONICS MAX II Operation Manual page 100

1) Press the
button wheel to scroll through the new Group List Items until NUM READS
is highlighted.
2) Press the ENTER key to display the Digits Edit Box.
3) Press the
right button wheel to scroll the highlighted value.
4) Press the
right button wheel to scroll the digit locations.
5) Repeat steps 3 & 4 until the NUM READS value is correctly displayed.
6) Press the OK key to save the NUM READS and return to the Group List
Items menu, or ESC to cancel entering the NUM READS.
7) Press the OK key to display the Digits Edit Box and re-enter the NUM
READS.
8) Press the OK key to save the NUM READS and return to the Group List
Items menu, or ESC to cancel entering the NUM READS.
If there's not enough memory available to create the group, an error message
box "NOT ENOUGH MEMORY" will be displayed. Press the OK or ESC key to
return to the Group List Items menu. It may be necessary to free some
memory in the MAX II at this time.
Find Quality Products Online at:
UP and DOWN arrow keys multiple times using the left
UP and DOWN arrow keys multiple times using the left or
LEFT and RIGHT arrow keys multiple times using the left or
95
GlobalTestSupply
www.
MAX II Bolt Tension Monitor
.com
sales@GlobalTestSupply.com