Table of Contents
Advertisement
Dakota Ultrasonics
ALARM HIGH: Gives the user the ability to set the HI limit parameter. If the
measurement exceeds this value, a red light will illuminate and sound the internal
beeper. Refer to page 148 for further info.
ANALOG OUTPUT: Proportional outputs (amplitude or distance), 0-10 volts. Speed
is determined by the PRF setting. Refer to page 150 for further info.
KEY CLICK: Gives the user the ability to set the level of the key press beeper OFF,
QUIET, or LOUD. Refer to page 151 for further info.
SET DATE: Gives the user the ability to set the internal date and time stamp in the
MAX II. Refer to page 152 for further info.
SHOW DATE: Gives the user the ability display the time, date or both in the main
measurement screen. Refer to page 152 for further info.
4.12 XFER (transfer) – Menu
BACKUP SETUPS: Copies setup files from either the internal or external SD
memory card to the other memory card, depending on the current internal/external
setting of Storage (current device being used to store data), located in the XFER
menu. Refer to page 188 for further info.
COPY DATA: Enables the user to copy all, or individual grid/log files from either the
internal or external SD memory card to the other memory card, depending on the
current internal/external setting of Storage (current device being used to store data),
located in the XFER menu. Refer to page 188 for further info.
COPY SCREENS: Copies screen capture (.tif) files from either the internal or
external SD memory card to the other memory card, depending on the current
internal/external setting of Storage (current device being used to store data), located
in the XFER menu. Refer to page 188 for further info.
CAPTURE TO FILE: Enables the user the ability to enable screen captures to .tiff
files, and used in conjunction with the FREEZE key. Refer to page 154 for further
info.
CAPTURE VIEWER: Enables the user to view all the captured (.tif) files stored in the
MAX II on the gauge display. Refer to page 156 for further info.
UPGRADE GAUGE: Enables the user the ability to upgrade the MAX II to the most
current firmware revision. Refer to page 153 for further info.
STORAGE: Enables the user to select which SD memory card to use for storage.
Note: if no card exists in the external reader slot, this option will be grayed out and
inactive. Refer to page 187 for further info.
34
GlobalTestSupply
www.
.com
Find Quality Products Online at:
sales@GlobalTestSupply.com
Advertisement
Table of Contents
