Using The Default Setup - DAKOTA ULTRASONICS MAX II Operation Manual

6) Press the OK key to delete the Setup File.
7) Finally, press the MEAS key to return to the measurement screen.

15.5 Using the Default Setup

The default setup feature was added to the MAX II to use, as a last resort, if there are
no setups stored in the gauge –factory or otherwise. The only time this might
possibly occur is if the setup file in the MAX II was somehow corrupted, and the user
does not have access to a computer to re-load the factory setups back into the MAX
II. This gives the user the ability to load and modify a basic setup as follows:
1) Press the MENU key once to activate the menu items tab. Press the MENU
key multiple times to tab right and the ESC key multiple times to tab left until
the SETUP menu is highlighted and displaying the submenu items.
Alternatively, press the
using the left button wheel.
Find Quality Products Online at:
Using the Default Setup
LEFT and RIGHT arrow keys multiple times
183
GlobalTestSupply
www.
MAX II Bolt Tension Monitor
.com
sales@GlobalTestSupply.com