DAKOTA ULTRASONICS MAX II Operation Manual page 62

10) Repeat steps 6 – 9, if using the TWO POINT zero calibration method, to
enter and save PHY LEN 2.
11) Press the
button wheel to scroll through the sub menu items until VELOCITY is
highlighted.
12) Press the ENTER key to display the Digits Edit Box and adjust the
VELOCITY of the cal bar.
Note: If using the TWO POINT method, the average velocity of the cal bars
should be entered (Cal Bar Vel1 + Cal Bar Vel2) / 2.
13) Press the OK key to save VELOCITY and display the Zero Calibration
menu items.
Find Quality Products Online at:
UP and DOWN arrow keys multiple times using the left
57
GlobalTestSupply
www.
MAX II Bolt Tension Monitor
.com
sales@GlobalTestSupply.com