DAKOTA ULTRASONICS MAX II Operation Manual page 160

in conjunction with the capture feature enables a user to save the entire screen shot
directly to a .tif (tagged image) file format that can be opened using any graphics
viewer. With the storage capacity of the MAX II, and additional external SD card
reader, the user can store as many screens shots as needed. It should also be
mentioned that this feature is immediately activated on boot up, therefore all the
menus items, list boxes and edit screens can also be captured for presentation or
training purposes. The procedure to freeze and capture the display is outlined below:
1) Press the MENU key once to activate the menu items tab. Press the MENU
key multiple times to tab right and the ESC key multiple times to tab left until
the XFER menu is highlighted and displaying the submenu items.
Alternatively, press the
using the left button wheel.
2) Use the
wheel to scroll through the sub menu items until CAPTURE TO FILE is
highlighted.
3) Use the
wheel to toggle the CAPTURE on/off. Note: Capture will be displayed in a
toolbar cell on the active display, indicating the feature is enabled.
4) Press the MEAS key to return to the measurement screen.
5) To capture a file, press the
followed by pressing it a second time to display the alpha numeric edit box
Find Quality Products Online at:
Capturing Screen Shots
LEFT and RIGHT arrow keys multiple times
UP and DOWN arrow keys multiple times using the left button
LEFT and RIGHT arrow keys multiple times on the right button
FREEZE key to freeze the screen,
155
GlobalTestSupply
www.
MAX II Bolt Tension Monitor
.com
sales@GlobalTestSupply.com