DAKOTA ULTRASONICS MAX II Operation Manual page 128

4) Press the
right button wheel to scroll the highlighted value.
5) Press the
right button wheel to scroll the digit locations.
6) Repeat steps 4 & 5 until the GATE value is correctly displayed.
7) Press the OK key to return to the measurement screen, or ESC to cancel
entering the GATE value.
The user can also access and adjust the gate from the tabbed menus. However, this
method is more tedious than making the adjustments using the Hot Menus. The
procedure using the tabbed menus is outlined below:
1) Press the MENU key once to activate the menu items tab. Press the
MENU key multiple times to tab right and the ESC key multiple times to tab
left until the AUTO menu is highlighted and displaying the submenu items.
Alternatively, press the
using the left button wheel.
2) Press the
button wheel to scroll through the sub menu items until GATE is highlighted.
Find Quality Products Online at:
UP and DOWN arrow keys multiple times using the left or
LEFT and RIGHT arrow keys multiple times using the left or
Adjusting the Gate using the Tabbed menus
LEFT and RIGHT arrow keys multiple times
UP and DOWN arrow keys multiple times using the left
GlobalTestSupply
www.
MAX II Bolt Tension Monitor
123
.com
sales@GlobalTestSupply.com