Upgrade Gauge - DAKOTA ULTRASONICS MAX II Operation Manual

3) Press the ENTER key to display the Digits Edit Box.
4) Press the
button wheel, to scroll the field locations.
5) Press the
right button wheel to scroll the value.
6) Repeat steps 4 & 5 until the Time & Date is correctly displayed.
7) Press the OK key to set the Time & Date and return to the menu screen, or
ESC to cancel entering the Time & Date.
8) Finally, press the MEAS key to return to the measurement screen and begin
taking readings.

13.16 Upgrade Gauge

The MAX II can be upgraded very conveniently at your desk or in the field. The latest
version of firmware can be found on the Dakota website, which can be compared to
the current version loaded in the MAX II. The version is displayed to the right of the
ABOUT menu item in the XFER menu.
With the USB cable connected to your PC, the gauge folder open, the latest firmware
file downloaded to your desktop and copied into the MAX II file folder, the procedure
to upgrade is outlined below:
Note: The firmware file extension is .bch, and there can only be one .bch file in the
MAX II folder. Simply delete the old .bch file, or rename the extension prior to
copying the new file in the MAX II folder.
Find Quality Products Online at:
UP, DOWN, LEFT, & RIGHT arrow keys on the left or right
LEFT and RIGHT arrow keys multiple times on the left or
153
GlobalTestSupply
www.
MAX II Bolt Tension Monitor
.com
sales@GlobalTestSupply.com