Viewing Stored Readings - DAKOTA ULTRASONICS MAX II Operation Manual

1) Press the
wheel to move the target cell cursor to the desired storage location.
2) Press the ENTER key to save the current reading in the highlighted cell
location. It's as simple as that!
Note: The Group Log can be hidden at any time by pressing the MEAS key.
However, in order to display it again, the hot menu item LOG must be
highlighted. When LOG is highlighted, press the ENTER key to display the
group.
Note: Once the file is open, it will remain open until it's closed or another file is
opened by the user. If the gauge is powered off, the
open the file when powered on. Simply press the ENTER key to display the file
from the measurement screen.

14.7 Viewing stored readings

It is sometimes necessary to go back and view the stored readings and waveforms
using the MAX II without a PC. The following procedures outline this process:
Find Quality Products Online at:
Group Log
UP, DOWN, LEFT, and RIGHT arrow keys on the left button
Viewing Stored Readings
167
GlobalTestSupply
www.
MAX II Bolt Tension Monitor
MAX II
will automatically
.com
sales@GlobalTestSupply.com