Table of Contents
Advertisement
Dakota Ultrasonics
1) Press the MENU key once to activate the menu items tab. Press the MENU
key multiple times to tab right and the ESC key multiple times to tab left until
the XFER menu is highlighted and displaying the submenu items.
Alternatively, press the
using the left button wheel.
2) Use the
wheel to scroll through the sub menu items until UPGRADE GAUGE is
highlighted.
3) Press the ENTER key to display the file name of the new firmware just
copied.
4) Press the OK key to start the upgrade process.
Note: The gauge will power itself off, and start upgrading indicated by the red
& green alarm lights periodically flashing. When the upgrade is completed,
the MAX II will automatically reboot. DO NOT LOSE POWER! Be sure the
MAX II has plenty of battery life prior to upgrading, or the AC adaptor is
connect to the gauge.
13.17 Freeze & Capture
The MAX II freeze feature enables a user to immediately freeze what's currently
being displayed on the screen for further review or analysis. The freeze feature used
Find Quality Products Online at:
Upgrading the MAX II
LEFT and RIGHT arrow keys multiple times
UP and DOWN arrow keys multiple times using the left button
154
GlobalTestSupply
www.
.com
sales@GlobalTestSupply.com
Advertisement
Table of Contents
