Storage - DAKOTA ULTRASONICS MAX II Operation Manual

3) Press the ENTER key to display the list of images (.tif) currently stored on
the internal or external SD card.
4) Use the
wheel to scroll through the list of images until the desired image is
highlighted.
5) Press the ENTER key to display the highlighted image, and the ESC key to
close the image and return to the list of images.
6) Repeat steps 4-5 as needed.
7) Finally, press the MEAS key to close the VIEWER and return the
measurement screen.

13.19 Storage

The MAX II has a 4 GB internal SD memory card installed on the board. There is
also an external SD slot located in the battery lithium ion battery compartment
located on the bottom end cap of the gauge. The external slot will accept all SD
cards up to 64 GB in size. In order to specify with storage device will be used,
external/internal, follow the procedure below:
Find Quality Products Online at:
UP and DOWN arrow keys multiple times using the left button
Setting the Storage Device
157
GlobalTestSupply
www.
MAX II Bolt Tension Monitor
.com
sales@GlobalTestSupply.com