Table of Contents
Advertisement
Dakota Ultrasonics
adjustments needed to control the display settings, measurement modes, and
group memory control.
activate the tabbed menu items and searching through a variety of menus to
make adjustments.
I) Temperature – Display's the current temperature of the fastener (manual, semi-
automatic, or automatic).
12.3 Adjusting the Display
The width refers to the overall viewable range, with respect to length, being displayed
on the screen. The starting length is displayed at the lower left side of the screen,
and the ending length is shown at the lower right hand side of the screen. The
difference between these values is called the Width. The procedures to adjust the
Width are outlined below:
1) Press the MEAS key once to activate measure menu items. Press the
MEAS key multiple times to move down and the ESC key multiple times to
move up, until the WIDTH cell is highlighted. Alternatively, Press the
UP and DOWN arrow keys multiple times using the left button wheel.
2) Press the
button wheel to scroll the highlighted value.
3) Alternatively, press the ENTER key to display the Digits Edit Box.
4) Press the
right button wheel to scroll the highlighted value.
Find Quality Products Online at:
All of these fields can be adjusted without having to
Adjusting the Width using the Hot Menus
LEFT and RIGHT arrow keys multiple times using the right
UP and DOWN arrow keys multiple times using the left or
GlobalTestSupply
www.
112
.com
sales@GlobalTestSupply.com
Advertisement
Table of Contents
