DAKOTA ULTRASONICS MAX II Operation Manual page 134

Note: The delay should be adjusted to a length slightly shorter than the
physical length of the fastener. If the length of the fastener is unknown, the
user will be forced to scroll the delay until the echo is located. However, if the
Length is known, use the digits edit box to enter the value and save time.
1) Press the MEAS key once to activate measure menu items. Press the
MEAS key multiple times to move down and the ESC key multiple times to
move up, until the DELAY cell is highlighted. Alternatively, press the
UP and DOWN arrow keys multiple times using the left button wheel.
2) Press the
button wheel to scroll the highlighted value.
3) Alternatively, press the ENTER key to display the Digits Edit Box.
4) Press the
right button wheel to scroll the highlighted value.
5) Press the
button wheel to scroll the digit locations.
6) Repeat steps 4 & 5 until the DELAY value is correctly displayed.
7) Press the OK key to return to the measurement screen, or ESC to cancel
entering the DELAY.
Find Quality Products Online at:
LEFT and RIGHT arrow keys multiple times using the right
UP and DOWN arrow keys multiple times using the left or
LEFT and RIGHT arrow keys multiple times using the left
129
GlobalTestSupply
www.
MAX II Bolt Tension Monitor
.com
sales@GlobalTestSupply.com