Table of Contents
Advertisement
Dakota Ultrasonics
8) Finally, press the
taking readings.
13.13 Upgrade Gauge
The MiniMax can be upgraded very conveniently at your desk or in the field. The
latest version of firmware can be found on the Dakota website, which can be
compared to the current version loaded in the MiniMax. The version is displayed to
the right of the ABOUT menu item in the XFER menu.
With the USB cable connected to your PC, the gauge folder open, the latest firmware
file downloaded to your desktop and copied into the MiniMax file folder, the
procedure to upgrade is outlined below:
Note: The firmware file extension is .bch, and there can only be one .bch file in the
MiniMax folder. Simply delete the old .bch file, or rename the extension prior to
copying the new file in the MiniMax folder.
1) Press the
multiple times to tab right and the
XFER menu is highlighted and displaying the submenu items.
2) Use the
menu items until UPGRADE GAUGE is highlighted.
3) Press the
key to return to the measurement screen and begin
Upgrading the MiniMax
key once to activate the menu items tab. Press the
and
arrow keys multiple times to scroll through the sub
key to display the file name of the new firmware just copied.
key multiple times to tab left until the
162
key
Advertisement
Table of Contents
