Introduction - Intel 852GME Design Manual

R
1.

Introduction

This design guide provides Intel design recommendations for the Intel
GMCH and the Intel
flexibility for board designers while reducing the risk of board related issues. The Intel 852GME, Intel
852GMV and Intel 852PM chipsets are pin compatible. Carefully follow the design information and
debug recommendations in this document.
The Mobile Intel
Threading Technology on 90-nm process technology, Intel
D processor on 90 nm process and in the 478-pin package in combination with the 852GME, 852GMV
or 852PM deliver high performance and professional mobile platform solution using internal and/or
external graphics. Section 2 provides an overview of system features of supported processor and chipset
combinations.
All recommendations will apply to all platforms unless specified. Any references to GMCH apply to all
platforms unless otherwise specified. Any reference to Mobile Intel Pentium 4 processor apply to
Mobile Intel Pentium 4 processor supporting Hyper-Threading Technology on 90-nm process
technology unless specified. Any reference to the Intel
®
Celeron D processor on 90 nm process and in the 478-pin package unless specified.
® ®
Intel 852GME, Intel 852GMV and Intel
®
852PM MCH chipset based systems. These design guidelines ensure maximum
® ®
Pentium 4 processor, Mobile Intel
®
852PM Chipset Platforms Design Guide
®
852GME, Intel
® ®
Pentium 4 processor supporting Hyper-
® ®
Celeron processor, or the Intel
® ®
Celeron processor applies to the Intel
Introduction
®
852GMV
® ®
Celeron
®
19