Table of Contents
Advertisement
Installation Precautions
• Do not install the machine in locations where naked flames are used.
• Do not place plant pots, cups, containers of cosmetics, chemicals, or water, or small metal
objects on top of the machine. There is a risk of failure, electric shock, or fire if liquids or other
items fall inside the machine.
• Do not install this machine in humid locations or locations where it may be exposed to splashing
water. Otherwise there is a risk of failure, electric shock, or fire.
• Do not install the machine where children may enter.
• A ventilation system must be provided if this machine is installed in a poorly ventilated area or
sealed room.
• Be sure to observe the following points when installing an extractor outlet:
(1) The extractor outlet must be installed in accordance with applicable local EHS
(environmental, health, and safety) guidelines.
(2) If the extractor outlet is fitted with a shutoff valve, the valve must be open when this machine
is in use.
• Check to confirm that the floor is sufficiently strong to bear the weight of the machine before
installing.
• Do not install this machine in locations where dust or powder is present. Failure or printing
defects may result (e.g., nozzle clogging, deflection) if dust gets inside this machine.
• Do not install this machine in locations exposed to drafts (e.g., from air conditioning).
Disregarding this precaution may result in dust or powder getting inside this machine.
• Do not install this machine in unstable locations or locations subject to vibration. This will
increase the risk of failure or printing defects (e.g., nozzle clogging, deflection).
• Do not install this machine in locations exposed to direct sunlight.
• Do not install this machine in locations subject to sudden temperature changes. This will
increase the risk of failure or printing defects (e.g., nozzle clogging, deflection).
• Do not install this machine in locations exposed to excessive noise from large machinery.
• Do not install this machine in locations where photographic fixing agents generate vapor or acid
gas (e.g., acetic acid, hydrochloric acid) or locations filled with metal working fluids or highly
volatile substances (e.g., amines, amine-modified alcohols). Malfunctions or printing defects
may result (e.g., nozzle clogging, deflection) as print head ink is more likely to harden under
such environments.
• Operating environment: 20 °C to 30 °C (68 °F to 86 °F), 35 %RH to 65 %RH (no condensation)
• Temperature range in which accuracy is guaranteed: 20 °C to 25 °C (68 °F to 77 °F)
• Install the machine in a location where the entire working area is clearly visible. (Guideline: 300
lux)
There is a risk of incorrect operation and injury if operated in a dark location.
8
Advertisement
Table of Contents
