Changing Hardware Configurations45 - Nortel Contivity 2600 Getting Started

Chapter 4
Changing Hardware Configurations
This chapter describes how Nortel Networks trained service personnel can change
existing hardware configurations, including installing LAN, WAN, or Hardware
Accelerator cards and how to add memory.
Warning: Wear an antistatic band when handling electronic
components for the Contivity to avoid damaging them.
Note: Turn off the Contivity and unplug it before installing LAN,
WAN, or Hardware Accelerator cards or system memory.
To access the diskette drive for system recovery operations, you must first remove
the Contivity's front bezel. To install LAN or WAN cards or to install additional
memory, you must remove the Contivity's front bezel and top cover.
Getting Started with the Contivity 2600
45