Downloading And Installing Element Manager; Procedure Steps - Nortel Business Communications Manager 450 Installation Manual

92 Element Manager installation
• Configuring user access (page 93)

Downloading and installing Element Manager

After your computer connects to the BCM450 system, either through an
Ethernet crossover cable or through a LAN connection, you can download
BCM Element Manager from the Administrator Applications area of the BCM
Web page. Use BCM Element Manager to connect to and configure your
BCM450 system.
BCM applications for BCM450 support the following Vista versions: Microsoft
Vista Business, Microsoft Vista Ultimate, and Microsoft Vista Enterprise. Both
32-bit and 64-bit versions of Windows Vista are supported except for the
limitations identified in Business Communications Manager 450— System
Overview (NN40160-103).
Prerequisites
• Element Manager is compatible with Windows 98SE, Windows 2000,
Windows XP, and Windows Vista, Windows 2000 server, Windows Server
2003, and Windows Server 2008 operating systems.
• A minimum 256 MB of RAM is required; 512 MB of RAM is recommended.
• 150 MB of available hard disk space is required.
• BCM Element Manager access is also supported through a Citrix server.

Procedure steps

Step
1
2
3
4
5
6
Copyright © 2006-2009 Nortel Networks
Action
Open a Web browser and enter the BCM system IP address.
The Enter Network Password dialog box appears.
Enter the user name and password (see the following for defaults):
Username: nnadmin
Password: PlsChgMe!
Click OK.
The Welcome to BCM Web page appears.
On the Welcome to BCM Web page, click Administrator Applications.
The Administrator Applications page appears.
On the Administrator Applications page, click BCM Element Manager.
The BCM Element Manager pane appears.
Click Download Element Manager on the right side of the screen, and
follow the instructions to download.
Nortel Business Communications Manager 450 1.0
Installation — System
NN40160-301 01.04 Standard
July 2009