Delay Parameters - Roland JU-06A Operation Manual

DELAY PARAMETERS

1. Press the SEQUENCER [EDIT] button to make it go dark.
2. Hold down the [DELAY (15)] button and select a parameter by pressing one of the numeric
buttons shown in the following table.
3. Use the [VALUE] knob to edit the value.
4. Press the [DELAY (15)] button once again to exit delay parameter editing.
BUTTON PARAMETER
[1] Delay Level
[2] Delay Time
[3] Delay Feedback
VALUE/EXPLANATION
Adjusts the volume of the delay sound.
0-15
Adjusts the time by which the sound is delayed.
0-15
Adjusts the amount of feedback (delay repeats).
0-15
* Saved as a patch setting.