72: Enhancer G Chorus; Enhancer G Chorus; 73: Enhancer G Flanger; Enhancer G Flanger - Roland JUNO-Gi Owner's Manual

72: ENHANCER g CHORUS

L in
Enhancer
Mix
R in Enhancer
Mix
Parameter Value
Enhancer Sens # 0–127
Enhancer Mix # 0–127
Chorus Pre Delay 0.0–100 msec
Chorus Rate # 0.05–10.00 Hz, note
Chorus Depth 0–127
Chorus Balance # D100:0W–D0:100W
Level 0–127

73: ENHANCER g FLANGER

L in
Enhancer
Mix
R in Enhancer
Mix
Parameter Value
Enhancer Sens # 0–127
Enhancer Mix # 0–127
Flanger Pre Delay 0.0–100 msec
Flanger Rate # 0.05–10.00 Hz, note
Flanger Depth 0–127
Flanger Feedback # -98–+98%
Flanger Balance #
D100:0W–D0:100W
Level
0–127
L out
Balance D
Balance W
Chorus
Balance W
R out
Balance D
Explanation
Sensitivity of the enhancer
Level of the overtones generated
by the enhancer
Adjusts the delay time from the
direct sound until the chorus
sound is heard.
Frequency of modulation
Depth of modulation
Adjusts the volume balance
between the sound that is sent
through the chorus (W) and the
sound that is not sent through
the chorus (D).
Output Level
Balance D
L out
Feedback
Balance W
Flanger
Balance W
R out
Balance D
Explanation
Sensitivity of the enhancer
Level of the overtones generated
by the enhancer
Adjusts the delay time from
when the direct sound begins
until the flanger sound is heard.
Frequency of modulation
Depth of modulation
Adjusts the proportion of the
flanger sound that is fed back
into the effect. Negative (-)
settings will invert the phase.
Adjusts the volume balance
between the sound that is sent
through the flanger (W) and the
sound that is not sent through
the flanger (D).
Output Level

74: ENHANCER g DELAY

L in
Enhancer
Mix
R in Enhancer
Mix
Parameter Value
Enhancer Sens # 0–127
Enhancer Mix # 0–127
Delay Time 0–2600 msec, note
Delay Feedback # -98–+98%
Delay HF Damp 200–8000 Hz, BYPASS
Delay Balance # D100:0W–D0:100W
Level 0–127

75: CHORUS g DELAY

Balance D
L in
Balance W
Chorus
Balance W
R in
Balance D
Parameter Value
Chorus Pre Delay 0.0–100 msec
Chorus Rate # 0.05–10.00 Hz, note
Chorus Depth 0–127
Chorus Balance # D100:0W–D0:100W
Delay Time 0–2600 msec, note
Delay Feedback #
-98–+98%
Delay HF Damp
200–8000 Hz, BYPASS
Delay Balance # D100:0W–D0:100W
Level 0–127
L out
Balance D
Balance W
Delay
Balance W
Feedback
R out
Balance D
Explanation
Sensitivity of the enhancer
Level of the overtones generated
by the enhancer
Adjusts the delay time from
the direct sound until the delay
sound is heard.
Adjusts the proportion of the
delay sound that is fed back into
the effect. Negative (-) settings
will invert the phase.
Adjusts the frequency above
which sound fed back to the
effect will be cut. If you do not
want to cut the high frequencies,
set this parameter to BYPASS.
Adjusts the volume balance
between the sound that is sent
through the delay (W) and the
sound that is not sent through
the delay (D).
Output Level
L out
Balance D
Balance W
Delay
Balance W
Feedback
R out
Balance D
Explanation
Adjusts the delay time from the
direct sound until the chorus
sound is heard.
Frequency of modulation
Depth of modulation
Volume balance between the
direct sound (D) and the chorus
sound (W)
Adjusts the delay time from
the direct sound until the delay
sound is heard.
Adjusts the proportion of the
delay sound that is fed back into
the effect. Negative (-) settings
will invert the phase.
Adjusts the frequency above
which sound fed back to the
effect will be cut. If you do not
want to cut the high frequencies,
set this parameter to BYPASS.
Adjusts the volume balance
between the sound that is sent
through the delay (W) and the
sound that is not sent through
the delay (D).
Output Level
73