Table of Contents
Advertisement
Operation
Display commands
Display commands for recording process data are axis-related. They are used to display
motion control data, e.g. position, speed, tracking distance. Display commands can be ex-
ecuted in the operating status "RUN" and "STOP".
}
To start display mode, select the DM command in the terminal program.
}
To end display mode, select the DO command in the terminal program.
Process data
Process data can be recorded in the operating status "RUN" and "STOP" via the
}
Motion controller.
}
Terminal program.
}
Oscilloscope function PScope.
Operating Manual PMCprimo C2
1004683-EN-02
| 64
Advertisement
Table of Contents
