Operation; Operating States And Changes In Operating Status; Status Graph - Pilz PMCprimo C2 Operating Manual

Operation

9 Operation
9.1

Operating states and changes in operating status

9.1.1

Status graph

The following status graph shows the operating states and changes in operating status.
The priority of a transition is indicated by a number in a small square in the middle of the
transition arrow. The operating states and changes in operating status are described in de-
tail below.
X40a/1 = 24 -> 0 V
Press reset
button
X40a/1 = 0 -> 24 V
X40a/1 = 0 V
HW reset:
- RS1
- Reset button
Fig.: Operating states and changes in operating status of the motion controller
Operating Manual PMCprimo C2
1004683-EN-02
Exit
boot menu
Command?
HW reset:
- RS1
- Reset button
RS2 or
Reset button
program
No user
Error detected
Automatic
HW reset
User program
present
Error detected
- RS3 or
Reset button
- RS4
- RS5
- RS6
Error detected
| 56