Security; Intended Use - Pilz PMCprimo C2 Operating Manual

Security

3 Security
3.1

Intended use

The motion controller PMCprimo C2 is suitable for use in logic and motion control applica-
tions.
Examples of typical application areas for the product are
} Clocked production machinery
}
Continuous manufacturing processes (winding, flying saw, cross cutter)
} Machine tools
}
Packaging machines
}
Pick and place applications
The motion controller as a plug-in card (PMCprimo C2.0) is installed in the servo amplifier
PMCprotego D. Once installed, the environmental conditions of the servo amplifier PMC-
protego D apply, e.g. the lower storage temperature (see "Technical Details" in the operat-
ing manual for the servo amplifier).
Please note that the PMCprimo C2 as a plug-in card (PMCprimo C2.0) has no internal elec-
trical connection to the servo amplifier PMCprotego D. When installing and operating the
device, you must refer to the operating manuals for the servo amplifiers, in particular the
safety guidelines.
The following is deemed improper use in particular
}
Any component, technical or electrical modification to the product,
}
Use of the product outside the areas described in this manual,
}
Use of the product outside the technical details (see Technical details).
Operating Manual PMCprimo C2
1004683-EN-02
NOTICE
EMC-compliant electrical installation
The product is designed for use in an industrial environment. The product
may cause interference if installed in other environments. If installed in other
environments, measures should be taken to comply with the applicable
standards and directives for the respective installation site with regard to in-
terference.
| 14