Table of Contents
Advertisement
Installation
6
Installation
6.1
Installation plug-in card PMCprimo C2.0
6.1.1
General requirements
Please also refer to the relevant operating instructions of the servo amplifier.
Operating Manual PMCprimo C2
1004683-EN-02
NOTICE
Damage due to electrostatic discharge!
Electrostatic discharge can damage components. Ensure against discharge
before touching the product, e.g. by touching an earthed, conductive sur-
face or by wearing an earthed armband.
NOTICE
The motion controller PMCprotego C2.0 (plug-in card) is installed in the
servo amplifier PMCprotego D. Once installed, the environmental conditions
of the servo amplifier PMCprotego D apply (see "Technical Details" in the
operating manual for the servo amplifier).
| 27
Advertisement
Table of Contents
