Agilent Technologies ENA Series Service Manual page 19

Table 1-1 Recommended Test Equipment
Equipment Critical specifications
Cable BNC(m)-BNC(m) Cable, 30 cm
BNC(m)-BNC(m) Cable, 122 cm
Coaxial cable with Type-N (m)
connectors, 61 cm (24 in), 2 ea.
Coaxial cable with 75  Type-N (m)
connectors, 61 cm (24 in), 2ea
N(m)-N(m) 50  Adapter
Adapter
N(m)-N(m) 75  Adapter
N(m) 50  - N(f) 75  Adapter
N(m)-BNC(f) Adapter
BNC(m)-BNC(m)
BNC Tee (m) (f) (f)
Torque Wrench Size: 3/4 inch
Torque: 136 N-cm
USB/GPIB Interface No Substitute
Personal Computer Windows 2000 / XP, VEE 6.2 or
with GPIB board VEE 7.xx
*1.P: Performance Tests, A: Adjustment, T: Troubleshooting
*2.Opt.050 and Opt.124 can be substituted for Opt.030. In this case, a N(m)-BNC(f) adapter is necessary.
*3.The accuracy of a standard E4419B of 0.02 dB is adequate for all tests/adjustments except "Dynamic Accuracy
Test". This test requires a power meter with Option G12 or H12 that has been certified to a higher accuracy speci-
fication. If an Option G12 or H12 power meter is not available, a test is provide on "Power Meter Accuracy Test"
on page 20 to verify the accuracy of a standard power meter.
Table 1-2 Alternative Test Equipment
Equipment Critical specifications
Frequency Counter Frequency: 50 MHz to 3 GHz
Accuracy: < 2.5 ppm
Power Meter No Substitute
Calibration Kit No Substitute
Short Type-N(m)
*1.P: Performance Tests, A: Adjustment, T: Troubleshooting
*2.Opt.050 and Opt.124 can be substituted for Opt.030. In this case, a N(m)-BNC(f) adapter is necessary.
*3.If an accurate measurement of the dynamic accuracy specification is not required, a standard E4419B can be used.
Chapter 1
Required Equipment
Recommended Model
Agilent p/n 8120-1838
Agilent p/n 8120-1840
Agilent N6314A (p/n
8120-8862)
Agilent p/n 8120-8898
Agilent p/n 1250-0778
Agilent p/n 1250-1528
Agilent p/n 1250-0597
Agilent p/n 1250-0780
Agilent p/n 1250-0216
Agilent p/n 1250-0781
Agilent p/n 8710-1766
Agilent 82357A
Model
Agilent 53132A/181A with
*2
Opt.010 and 030
*3
Agilent E4419B
Agilent 85032F
Agilent 11512A
General Information
Qty. *1
Use
1 P
1 P,A
1 P,A,T
1 P,A,T
1 A,T
1 A,T
1 P
1 P,A
1 P
1 P
1 P,A
1 P,A
1 P,A
Qty. *1
Use
1 P,A
1 P,A
1 T
2 P,T
19