Agilent Technologies ENA Series Service Manual page 114

Troubleshooting
Function Specific Troubleshooting
Figure 4-22 TCP/IP Properties dialog box (IP Address tab)
d. If the IP Address and the Subnet Mask are already assigned, go to Step 6. If they are not
e. Double-click "
NOTE
From Step e to Step h are procedures for Windows
f. In the Control Panel window, double-click
g. The dialog box appears. If
h. If the
114
assigned yet, enter them as follows:
IP Address 192.168.0.1
Subnet Mask 255.255.255.0
Default Gateway blank
To enter a specific IP Address and Subnet Mask, click "Use the following IP address"
option button to select it. Input your IP address in the "IP Address" box and your subnet
mask in the Subnet Mask box (overwrite the initial values).
My Computer
double-click
Control Panel
fig will appear. In the Configuration
press the button.
Properties
address and subnet mask.
Obtain an IP address automatically
. Enter the IP address xxx.xxx.xxx.y and subnet mask xxx.xxx.xxx.xxx as
address
shown in Figure 4-23. The letters x represent the IP address and subnet mask of the
E5061A/E5062A. The letter y is different from the IP address of the E5061A/E5062A.
Press the button.
OK
" icon on Windows desktop of the external PC. And
. The Control Panel window will appear.
Network . The Network dialog box shown in
tab, select TCP/IP
has been selected, record the IP
Specify an IP address
has been selected, select the
(display it in revers video) and
Specify an IP
Chapter 4