Table of Contents
Advertisement
Required Test Equipment
Required equipment for performing the adjustments and performance tests is listed in
Table 2-1. Use only calibrated test equipment when performing the adjustments and
performance tests for the E4915A/E4916A.
Required Test Equipment for Adjustment and Performance Tests
Equipment
Power Meter
Power Sensor
Frequency Counter Frequency: 1 MHz to 180 MHz
PI Network Test
Fixture
Impedance Probe
Kit (for Opt.001)
Order of Adjustments and Performance Tests
Perform the operations in order of the page numbers.
Note
To perform adjustments and performance tests, it is
the outer cover.
Critical Speci cations
No substitute
Frequency: 1 MHz to 180 MHz
Power: +5 dBm to 20 dBm
Accuracy:
0.25 ppm
<
No substiture
No substitute
Table 2-1.
436A, 437B,
or 438A
8482A
5334B Opt.010
41900A
E4916A Opt.001
Model
not
necessary to remove
Adjustments and Performance Tests 2-3
Qty
1
1
1
1
1
Advertisement
Table of Contents
