Agilent Technologies ENA Series Service Manual page 216

System Recovery
Initial Registration of E5061A/E5062A
Step 5. In the Network Identification Wizard dialog box (1/2), select the
assumes the following user has logged on to this computer
is in the
B-4).
Figure B-4 Network Identification Wizard dialog box (1/2)
Step 6. In the Network Identification Wizard dialog box (2/2), click the
initial registration of the E5061A/E5062A (Figure B-5). Then, the measurement display of
theE5061A/E5062A appears.
Figure B-5 Network Identification Wizard dialog box (2/2)
216
User Name box. If not, type in
Windows always
box and check that
agena . Finally, click the Next>
Finish
agena
button (Figure
button to finish the
Appendix B