Receiver If Range Adjustment; Receiver Ports Characteristics Adjustment - Agilent Technologies ENA Series Service Manual

Required equipment for the source output power adjustment for opt. 150/250
Description
Power Meter
Power Sensor
Required equipment for the source output power adjustment for opt. 175/275
Description
Power Meter
Power Sensor
Minimum Loss Pad

Receiver IF Range Adjustment

The purpose of this procedure is to adjust the IF range of the receiver board.
Required equipment for the receiver IF range adjustment for opt. 150/250
Description
Power Splitter
N(m)-N(m) Cable
Required equipment for the receiver IF range adjustment for opt. 175/275
Description
Power Splitter 75 
N(m)-N(m) Cable 75 

Receiver Ports Characteristics Adjustment

The purpose of this procedure is to adjust source match, directivity and tracking.
Chapter 3
Required Adjustment after Replacing Assembly
Recommended Model
Agilent E4419B
Agilent 8482A
Recommended Model
Agilent E4419B
Agilent 8482A
Agilent 11852B
Recommended Model
Agilent p/n 0955-0751
Agilent N6314A (p/n
8120-8862)
Recommended Model
Agilent p/n 0955-0752
Agilent p/n 8120-8898
Adjustment
85