Agilent Technologies ENA Series Service Manual page 230

Computer Virus Check
Computer Virus Check
2. Select a suitable drive name, enter the network path as shown in Figure D-11, and then
Figure D-11 Map Network Drive Dialog Box
3. The dialog box to enter the user name and the password appears. Enter the user name
4. The network path will appear on the PC's Explorer. Confirm that the network path you
5. Execute the anti-virus software on the PC, and the menu for the anti-virus software will
6. Check if the drives C and D are infected.
Step 6. Disconnect the drives of E5061A/E5062A from the PC.
1. Click Programs -Window Explorer on the Start Menu to start up the PC's Explorer.
2. Select Network Drive you checked, and press the
NOTE
If no drive has been infected, proceed the next step.
If the drive C or D has been infected, replace the A27 HDD of the E5061A/E5062A.
Step 7. Change the IP address and subnet mask of the E5061A/E5062A if you select
following IP address
1. Press
2. Press
3. Double-click the Local Area Connection icon (1 in Figure D-1) in the Network and
4. The dialog box (Figure D-12) appears. Select
230
Click Tools - Map Network Drive on the menu of the Explorer.
press the OK button. For example, the network path is \\C_NAME\S_NAME.
C_NAME in the network path is the computer name of the E5061A/E5062A you
confirmed on 4 of Step2.
S_NAME in the share name of the C or D drive of the E5061A/E5062A you enterd on 5
of Step 3.
agena and then click the OK
enter is connected to the PC.
appear. Check the drive you entered on 2 of Step 5. For the operation of anti-virus
software, refer to its manual.
Click Tools - Disconnect Network Drive on the menu of the Explorer. Disconnect
Network dialog box will appear.
from the Explorer.
and entered the IP address and subnet mask on the 6 of Step 1.
key.
Misc Setup - Network Setup
Dial-up Connections window. The Local Area Connection Status dialog box (Figure
D-2) appears. Click the
Properties
button.
OK button. The drive will disappear
- Network Configuration
button (2 in Figure D-2).
Obtain an IP address automatically
Use the
.
and
Appendix D